Directory layout

Location of configuration files, spools and executables depends on the distribution you have installed. Therefore, in this document, several symbols are used to stand for particular paths. You may have to replace uppercase symbols with real paths on your Sympa.

Note

All paths below are defined in an internal module $MODULEDIR/Sympa/Constants.pm.

Definitions of $EXECCGIDIR, $CSSDIR and $PICTURESDIR were added to Sympa/Constants.pm as of Sympa 6.2.26.

Default paths below are determined with options fed to configure script in the time of building packages by each distribution.

About the "suggested configure option" in below, see "Run configure script" - "New installation".

`$CONFIG`

Main configuration file (sympa.conf).

Distribution	Path
Debian	`/etc/sympa/sympa.conf` or `/etc/sympa/sympa/sympa.conf` (see note)
FreeBSD	`/usr/local/etc/sympa/sympa.conf`
MacPorts	`/opt/local/etc/sympa/sympa/sympa.conf`
RPM	`/etc/sympa/sympa.conf`
Source distribution default	`/etc/sympa/sympa.conf`
(by version prior to 6.2)	`/etc/sympa.conf`
Suggested configure option	`/etc/sympa/sympa.conf`

(Note) On Debian 8 (jessie) or earlier, /etc/sympa/sympa.conf is used. On Debian 9 (stretch) or later, /etc/sympa/sympa.conf may also be used, though /etc/sympa/sympa/sympa.conf is used by default.

`$SENDMAIL_ALIASES`

Aliases file

This path may be overridden by sendmail_aliases parameter.

Distribution	Default path
Debian	`/etc/mail/sympa/aliases`
FreeBSD	`/etc/mail/sympa_aliases`
MacPorts	`/opt/local/etc/sympa/sympa_aliases`
RPM	`/var/lib/sympa/sympa_aliases`
Source distribution default	`/etc/mail/sympa_aliases`
Suggested configure option	`/etc/mail/sympa_aliases`

`$PIDDIR`

Directory of PID files.

Distribution	Path
Debian	`/run/sympa`
FreeBSD	`/var/run/sympa`
MacPorts	`/opt/local/var/run/sympa`
RPM	`/run/sympa`
(with RHEL/CentOS 6)	`/var/run/sympa`
Source distribution default	`/home/sympa`
Suggested configure option	`/usr/local/var/run/sympa`

`$EXPLDIR`

List home. Base directory of list configurations.

This path may be overridden by home parameter.

Distribution	Default path
Debian	`/var/lib/sympa/list_data`
FreeBSD	`/usr/local/share/sympa/list_data`
MacPorts	`/opt/local/var/lib/sympa/list_data`
RPM	`/var/lib/sympa/list_data`
Source distribution default	`/home/sympa/list_data`
(by version prior to 6.0)	`/home/sympa/expl`
Suggested configure option	`/usr/local/var/lib/sympa/list_data`

`$SPOOLDIR`

Base directory of spools.

Location of each spool may be overridden by queue, queueauth, queueautomatic, queuebounce, queuebulk, queuedigest, queuemod, queueoutgoing, queuesubscribe, queuetask, queuetopic, tmpdir or viewmail_dir parameter.

Distribution	Path
Debian	`/var/spool/sympa`
FreeBSD	`/var/spool/sympa`
MacPorts	`/opt/local/var/spool/sympa`
RPM	`/var/spool/sympa`
Source distribution default	`/home/sympa/spool`
Suggested configure option	`/usr/local/var/spool/sympa`

`$SYSCONFDIR`

Base directory of global configuration (except sympa.conf).

This path may be overridden by etc parameter.

Distribution	Default path
Debian	`/etc/sympa`
FreeBSD	`/usr/local/etc/sympa`
RPM	`/etc/sympa`
MacPorts	`/opt/local/etc/sympa`
Source distribution default	`/home/sympa/etc`
Suggested configure option	`/usr/local/etc`

`$LOCALEDIR`

Base directory of message catalogs.

Distribution	Path
Debian	`/usr/share/locale`
(by Debian 9 (stretch) or earlier)	`/usr/lib/sympa/locale`
FreeBSD	`/usr/local/share/locale`
MacPorts	`/opt/local/share/locale`
RPM	`/usr/share/locale`
Source distribution default	`/home/sympa/locale`
Suggested configure option	`/usr/local/share/locale`

`$LIBEXECDIR`

Path of auxiliary programs.

Distribution	Path
Debian	`/usr/lib/sympa/bin`
FreeBSD	`/usr/local/libexec/sympa`
MacPorts	`/opt/local/libexec`
RPM	`/usr/libexec/sympa`
Source distribution default	`/home/sympa/bin`
Suggested configure option	`/usr/local/libexec`

`$SBINDIR`

Path of daemons and administration programs.

Distribution	Path
Debian	`/usr/lib/sympa/bin`
FreeBSD	`/usr/local/libexec/sympa`
MacPorts	`/opt/local/sbin`
RPM	`/usr/sbin`
Source distribution default	`/home/sympa/bin`
Suggested configure option	`/usr/local/sbin`

`$SCRIPTDIR`

Path of other executables.

Distribution	Path
Debian	`/usr/share/sympa/bin`
FreeBSD	`/usr/local/libexec/sympa`
MacPorts	`/opt/local/share/sympa/bin`
RPM	`/usr/share/sympa/bin`
Source distribution default	`/home/sympa/bin`
Suggested configure option	`/usr/local/share/sympa/bin`

`$MODULEDIR`

Base directory of internal modules (module path).

Distribution	Path
Debian	`/usr/share/sympa/lib`
FreeBSD	`/usr/local/libexec/sympa`
MacPorts	`/opt/local/share/sympa/lib`
RPM	`/usr/share/sympa/lib`
Source distribution default	`/home/sympa/bin`
Suggested configure option	`/usr/local/share/sympa/lib`

`$DEFAULTDIR`

Base directory of default settings.

Distribution	Path
Debian	`/usr/share/sympa/default`
FreeBSD	`/usr/local/share/sympa/defaults`
MacPorts	`/opt/local/share/sympa/default`
RPM	`/usr/share/sympa/default`
Source distribution default	`/home/sympa/default`
(by version prior to 6.0)	`/home/sympa/bin/etc`
Suggested configure option	`/usr/local/share/sympa/default`

`$ARCDIR`

Base directory of archives.

This path may be overridden by arc_path parameter.

Distribution	Default path
Debian	`/var/lib/sympa/arc`
FreeBSD	`/usr/local/share/sympa/arc`
MacPorts	`/opt/local/var/lib/sympa/arc`
RPM	`/var/lib/sympa/arc`
Source distribution default	`/home/sympa/arc`
Suggested configure option	`/usr/local/var/lib/sympa/arc`

`$BOUNCEDIR`

Base directory of bounce and tracking information.

This path may be overridden by bounce_path parameter.

Distribution	Default path
Debian	`/var/lib/sympa/bounce`
FreeBSD	`/usr/local/share/sympa/bounce`
MacPorts	`/opt/local/var/lib/sympa/bounce`
RPM	`/var/lib/sympa/bounce`
Source distribution default	`/home/sympa/bounce`
Suggested configure option	`/usr/local/var/lib/sympa/bounce`

Directories specific to web interface

`$EXECCGIDIR`

Path of web interface programs (WWSympa and SympaSOAP).

Distribution	Path
Debian	`/usr/lib/cgi-bin/sympa`
FreeBSD	`/usr/local/libexec/sympa`
MacPorts	`/opt/local/www/sympa/cgi`
RPM	`/usr/libexec/sympa`
Source distribution default	`/home/sympa/bin`
Suggested configure option	`/usr/local/lib/sympa/cgi`

`$STATICDIR`

Base path of static web contents.

This path may be overridden by static_content_path parameter.

Distribution	Default path
Debian	`/usr/share/sympa/static_content`
(by Debian 9 (stretch) or earlier)	`/var/lib/sympa/static_content`
FreeBSD	`/usr/local/share/sympa/static`
MacPorts	`/opt/local/www/sympa/static_content`
RPM	`/usr/share/sympa/static_content`
(by version prior to 6.2.26)	`/var/lib/sympa/static_content`
Source distribution default	`/home/sympa/static_content`
Suggested configure option	`/usr/local/var/lib/sympa/static_content`

`$CSSDIR`

Directory of automatically generated cascading style sheets (CSS).

This path may be overridden by css_path parameter.

Distribution	Default path
(by version prior to 6.2.26 of any distributions)	`$STATICDIR/css`
Debian	`/var/lib/sympa/css`
FreeBSD	`/usr/local/share/sympa/static/css`
MacPorts	`/opt/local/var/lib/sympa/static_content/css`
RPM	`/var/lib/sympa/css`
Source distribution default	`/home/sympa/static_content/css`
Suggested configure option	`/usr/local/var/lib/sympa/static_content/css`

`$PICTURESDIR`

Directory for subscribers pictures.

On Sympa 6.2.26 or later, this path may be overridden by pictures_path parameter.
On Sympa prior to 6.2.26, this path is a subdirectory pictures under the path that may be overridden by static_content_path parameter.

Distribution	Default path
(by version prior to 6.2.26 of any distributions)	`$STATICDIR/pictures`
Debian	TBD
FreeBSD	`/usr/local/share/sympa/static/pictures`
MacPorts	`/opt/local/var/lib/sympa/static_content/pictures`
RPM	`/var/lib/sympa/pictures`
Source distribution default	`/home/sympa/static_content/pictures`
Suggested configure option	`/usr/local/var/lib/sympa/static_content/pictures`

*[Suggested configure option]: See the note above.